How to Convert Electric Air Compressor to Gas

Filed under: Air Compressors,Air Tools |

There are lots of people wanting to have an electric operated portable air compressor.  But, although most of the people all around the world have this type of air compressor, most of them are also want to convert their electric-operated air compressor into a gas-operated machine. This is because they want to increase the characteristic of being a portable air compressor of their machines.  There are lots of advantages that people can get a lot of benefits in having a gas-operated air compressor rather than the compressor that is operated with electricity. So, this is the main reason why people choose to convert their machines into a gas-operated machine. But, the procedures on how to how to convert electric air compressor to gas are very complicating and need a lot of time.

Convert Electric Air Compressor to GasAlthough the procedures on how to convert electric air compressor to gas is quite difficult, there are some steps that can be used by people. These procedures are the easiest possible procedures that people can use in order for them to have the desired machine.

The first step on how to convert electric air compressor to gas is to identify the rating according to horsepower of the particular machine. This particular feature can be seen by people in the documentation of the motor and even in the nameplate. It is a requirement that people should make sure that the horsepower of the gas-operated should be equal and even greater than the actual horsepower by the electric motor. This is the most important step onhow to convert electric air compressor to gas because if this is not followed by the people wanting to convert their machines, the conversion process will be very improper and ineffective.

The next step on how to convert electric air compressor to gas is all about the pulley. The chosen pulley should match on the pulley of the electric motor. This is also very important because if one pulley is different from the other pulley, the conversion will be very ineffective and it will not work. The diameter of the chosen pulley should fit on the shaft of the particular gas engine. But, before comparing and even fitting the pulley to the shaft, it is very important to turn off the power of the electric motor to avoid having problems and committing incidents. The tool that can be used by people to remove the motor powered by electricity is none other than the wrench. This is another important step that people can use in order to have a very successful conversion.

After these two steps, the next thing to do on how to convert electric air compressor to gas is about the fitting the important parts into the particular engine. First thing first, the performer should place the engine powered by gas on the top of the motor that is powered by electricity. After this step, the performer of the conversion should compare the size of the pulley of the electric motor from the gas engine pulley. It should be aligned in order for the people to accurately get the actual size of the two pulleys. The use of marker is very important in this step as it can used to mark the location of the new holes for mounting. After marking the accurate location, drilling the new mounting holes is the next thing to do. This is now the main step on how to convert electric air compressor to gas. But, it is very important to be very sure about drilling a hole. It shouldn’t be through the tank of compressor.

The procedures on how to convert electric air compressor to gas is very incomplete if the setting of the motor back to the mounted area is not included.  This setting should be done with the use of bolts. The bolts should be tightened with the use of wrench. This is very easy as each and every person in the world have the capacity to do the procedure. The new belt should also be installed in this particular step. The location that this new belt should be installed is between the two pulleys. Some of the people converting these motors are required purchasing a new and different size of belt because there are some pulleys require different size of belts.

The last step on how to convert electric air compressor to gas is by locating the blow-off valve to the actual compressor. After all of these steps, the previous motor that has the feature of electric-powered is now a gas-operated machine. Although the converting process of this type of motor is very easy, it is very advisable to hire a professional and let them be the one to do the process. These are the people who have a lot of knowledge in this type of procedure.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>